Renewable energy Statistics 2023

Renewable energy Statistics 2023

Renewable energy refers to energy sources that are replenished naturally on a human timescale, such as solar, wind, hydroelectric, and geothermal power. These energy sources are considered renewable because they are not depleted when used, unlike nonrenewable sources such as fossil fuels (e.g. coal, oil, and natural gas), which are finite and will eventually be exhausted.

There are many different statistics that can be used to measure the use and effectiveness of renewable energy. Some common statistics include:

  • Renewable energy capacity: This measures the total amount of renewable energy that is available to generate electricity. It is typically measured in megawatts (MW) or gigawatts (GW).
  • Renewable energy generation: This measures the amount of electricity that is actually generated from renewable energy sources. It is typically measured in kilowatt-hours (kWh) or terawatt-hours (TWh).
  • Renewable energy share: This measures the percentage of total energy consumption that is supplied by renewable energy sources. It is typically expressed as a percentage.
  • Renewable energy cost: This measures the cost of generating electricity from renewable energy sources, compared to nonrenewable sources. It is typically measured in dollars per kilowatt-hour (kWh).
  • Renewable energy jobs: This measures the number of jobs that are related to the renewable energy industry, including manufacturing, installation, maintenance, and research and development.

There are many different organizations that track and publish renewable energy statistics, including the International Energy Agency, the Renewable Energy Policy Network for the 21st Century, and the U.S. Energy Information Administration.

The renewable energy target European Union

The renewable energy target European Union

The European Union has set a target to increase the share of renewable energy in its energy mix to at least 32% by 2030. This target is part of the EU’s commitment to the Paris Agreement on climate change, which aims to limit global warming to well below 2 degrees Celsius. To reach this target, the EU has adopted a number of measures, including the Renewable Energy Directive, which sets binding national targets for the share of renewable energy in the final energy consumption of each member state. The Directive also establishes a framework for the promotion of renewable energy sources and the development of renewable energy projects. In addition to the Renewable Energy Directive, the EU has also adopted other measures to promote the use of renewable energy, such as the Energy Efficiency Directive, which sets targets for the improvement of energy efficiency, and the Clean Energy for All Europeans package, which includes a number of measures to support the transition to a low-carbon economy, including the establishment of a framework for the governance of the energy union and the promotion of clean energy technologies. Overall, the EU’s target to increase the share of renewable energy in its energy mix is an important step in the transition to a more sustainable and low-carbon future.
How Renewable energy market growth in 2023

How Renewable energy market growth in 2023

The renewable energy market has been growing rapidly in recent years, driven by increasing concerns about climate change and the need to reduce greenhouse gas emissions. The use of renewable energy sources, such as solar, wind, and hydroelectric power, has been expanding as countries, businesses, and individuals seek to reduce their carbon footprint and transition to cleaner sources of energy.

According to the International Energy Agency (IEA), the share of renewable energy in the global energy mix increased from 18% in 2018 to 22% in 2019, and is expected to continue growing in the coming years. This growth is being driven by a combination of policy incentives, technological advancements, and declining costs for renewable energy technologies.

The solar and wind energy sectors have seen particularly strong growth in recent years, with the IEA estimating that the share of solar in the global energy mix will double by 2030, while the share of wind will triple. Other renewable energy sources, such as hydroelectric power and biofuels, are also expected to play an important role in the transition to a more sustainable energy system.

Overall, the renewable energy market is expected to continue expanding in the coming years as more countries adopt policies to promote the use of clean energy and as the cost of renewable technologies continues to decline.

5 Renewable energy trends for 2023

5 Renewable energy trends for 2023

It is difficult to predict specific trends in renewable energy for 2023, as the development and adoption of renewable energy technologies can be influenced by a variety of factors, including technological advances, policy developments, and market forces. However, it is likely that renewable energy will continue to play a significant role in the global energy mix in the coming years. Some trends that may shape the renewable energy landscape in 2023 and beyond include:

Continued growth in renewable energy capacity: Renewable energy sources such as solar, wind, and hydroelectric power are expected to continue to expand their share of the global energy mix in the coming years.

Increased adoption of battery storage: Battery storage systems can help to store excess renewable energy for use when it is needed, making it easier to integrate renewable energy into the grid. The use of battery storage is expected to increase in the coming years.

Improved efficiency and cost-competitiveness of renewable energy technologies: As renewable energy technologies continue to mature and become more widely deployed, it is likely that their efficiency and cost-competitiveness will improve. This could make them more attractive to both consumers and businesses.

Greater focus on grid integration and flexibility: As the penetration of renewable energy in the grid increases, there will be a greater need to ensure that the grid is able Consider the variability of renewable energy sources. This may involve the use of advanced technologies such as smart grids and demand-side management to optimize the use of renewable energy.

Increased use of renewable energy in transportation: The transportation sector is a major contributor to greenhouse gas emissions, and the use of renewable energy in transportation is expected to increase in the coming years. This may involve the use of electric vehicles powered by renewable energy, as well as the use of renewable fuels such as biofuels.

What energy source is Coming for the future?

What energy source is Coming for the future?

There is no one energy source that is universally considered the most promising for the future, as different sources have different strengths and limitations, and the most appropriate choice will depend on the specific circumstances and needs of a given situation.

That being said, there are a number of energy sources that are considered to be promising for the future due to their potential for widespread adoption and ability to meet increasing energy demands while also reducing negative environmental impacts. These include:

1- Renewable energy sources such as solar, wind, and hydroelectric power, which have low or zero carbon emissions and are plentiful and widely available.

2- Nuclear power, which has a high energy density and generates low greenhouse gas emissions, but also has significant safety and waste disposal concerns.

3- Advanced biofuels, which can be produced from a variety of feedstocks and have the potential to reduce greenhouse gas emissions compared to traditional fossil fuels.

4- Energy storage technologies such as batteries and pumped hydro storage, which can help to smooth out fluctuations in renewable energy generation and enable wider adoption of renewable energy sources.

It is likely that a mix of different energy sources will be used in the future, with the specific mix varying depending on the region and specific energy needs.

What is Hydrogen energy and how does it work?

What is Hydrogen energy and how does it work?

Hydrogen energy is a form of energy that is stored in the chemical bonds of hydrogen atoms. It can be used to power a variety of devices, including fuel cells, internal combustion engines, and even small electronic devices like laptops and cellphones.

One of the most common methods is through the electrolysis of water, in which electricity is used to split water molecules into hydrogen and oxygen. The hydrogen can then be stored in tanks or fuel cells and used as a fuel source.

Hydrogen can be used to power fuel cells, which are devices that use a chemical reaction between hydrogen and oxygen to produce electricity. In a fuel cell, hydrogen and oxygen are combined in a chamber to produce electricity, heat, and water. The electricity produced can be used to power a variety of devices, including cars, homes, and businesses.

Another way hydrogen can be used for energy is by burning it in internal combustion engines. These engines are similar to the ones found in gasoline-powered cars, but instead of using gasoline, they use hydrogen as a fuel. When burned, hydrogen reacts with oxygen in the air to produce water and heat, which can be used to power the engine.

Overall, hydrogen energy is a clean and efficient source of energy that has the potential to play a significant role in the transition to a low-carbon economy.

Being a renewable energy

Pros and cons of geothermal energy

Pros of geothermal energy : 

Being a renewable energy, it is one of the sources of energy that does not run out at least for future generations.
Being a clean energy that is not harmful to the environment, and does not cause any pollution either in its extraction, conversion or use.
It is available in very large quantities, in vast areas and for most countries of the world.
Low energy production costs after the initial costs of Station production (which can be prohibitive).
High yield of extracted energy.

cons of geothermal energy : He covered all the advantages of geothermal energy, which made it at the forefront of future alternative energy sources. However, there are some factors that are difficult to spread, at least for the time being. One of the most important of these reasons is the high cost of erecting power plants using geothermal energy. This is due to the difficulty of drilling wells at great depths and amid very high temperatures.
Although geothermal energy is less expensive than any other energy source, it is exhaustible and can create environmental problems . When it is exhausted in one facility, it leads to the loss of the entire facility. Some facilities also emit large amounts of sulfur, which can be equivalent to what is released by similar-sized facilities using coal fuel with a high sulfur content. Although geothermal applications will expand in the future, they are not expected to cover more than 5-10% of global energy needs, mainly due to the lack of convective water systems in many parts of the world.


Types of geothermal power plants

Types of geothermal power plants

Power plants operating by dry steam method : It is the most widespread type, and it works by pumping hot steam directly from the hot water reserves located in the ground to the turbine, which rotates the electric generator connected to it and thus generates electrical energy. After the hot steam passes through and circulates to the turbine, the Steam is condensed and thus converted into water, which is returned to the underground via an injection well.

Fumigation power plants : These stations differ from dry steam stations in that instead of steam, hot water is pumped at high pressure directly to the evaporation tank located on the surface of the Earth. The temperature of the evaporation tank is low, as well as its pressure is low, and this decrease in heat and the difference in pressure causes the evaporation of hot water, steam is formed, which is directed towards the turbine to rotate and the electric generator rotates with it. After that, the Steam is cooled and condensed to become water, which is returned to the ground via an injection well.

Dual-circuit power plants : Dual-circuit power plants differ from the previous ones in that steam from underground water does not reach directly to the turbine, but hot water is pumped from underground to a heat exchanger where hot water passes through pipes in a different liquid with a low boiling point (below the boiling temperature of water). The second liquid is converted into steam by the heat of the water in the pipes, and it goes to the turbine, which rotates and the electric generator rotates with it. After that, the water returns to the underground by the injection well, while the steam that rotated the turbine is condensed and returns to the heat exchanger to be used again.

Geothermal energy

Geothermal energy

Geothermal energy It is a high thermal energy of natural origin stored in magmIt is estimated that more than 98% of the Earth’s mass is made up of rocks whose temperature exceeds 1000 degrees Celsius. The temperature rises as we go deeper into the Earth at a rate of about 2.7 degrees Celsius per 100 meters in depth, and this thermal energy is mainly used to generate electricity, and this requires drilling many pipes to depths of up to about 6 kilometers. Sometimes hot water is used for heating when the heat is close to the surface of the Earth, and we find it at a depth of 160 meters or sometimes in certain areas in the form of hot springs that reach the surface of the Earth.a in the Earth’s interior.This renewable energy can be enough to cover the world’s energy needs for the next 10,000 years, but converting it into electrical energy is an expensive process due to drilling operations to great depths and the need for many pipes to extract hot water in large quantities, although thermal energy is free and is widely available but difficult to obtain.The geothermal energy rate is estimated to be about twice as much as all the energy used by modern man from various sources. In addition to the energy coming from the geological depths of the Earth, the Earth’s surface receives the sun’s energy and stores it in the surface layer, estimated to be 10 meters thick during the summer months and releases it during the winter months.


Cons of wind power

Despite the many advantages of wind, there are some disadvantages or challenges that can arise when relying on wind energy, such as:
– Unreliable source : in general, it is not possible to be sure of the wind blowing reliably, therefore, if it relies on wind only to generate electricity, which leads to a lack of electricity on days when the wind does not blow, and on the other hand, severe storms, high winds or lightning damage wind turbines.
– Threat to wildlife : turbines and their feathers and edges can be unsafe for wildlife, especially for birds that are in the same area, and there is no effective and reliable way to prevent such a threat.
– Noise and visual pollution : wind turbines emit a sound ranging from 50 to 60 decibels, therefore, if the turbine is next to the house, it will make an annoying noise, and on the other hand, some consider that The Shape of turbines, especially next to houses, is ugly and gives an unloved appearance to the place.
– Cost and maintenance : although wind energy is lower in cost than other energy sources, it remains expensive when starting a turbine construction project, and its maintenance is expensive.
– Safety: turbines can threaten the safety of workers in the field, especially during times of severe storms and high winds, which cause damage or problems in the turbine blades, increasing the likelihood of their occurrence, which threatens the safety of workers, causing them lifelong disability or causing their death.
– Limitation : the harnessing of wind energy is limited to certain places only, which are places where the wind speed is high, and this is mostly in remote places away from cities.